Vector Scan
Vector Scan Function: User can combine different Auto-Scan Tour based on all
kinds of tours.
Function Programming
→
1. PTZ Tour
Vector Scan Tour Operation:
2. Vector Scan
1. Move the joystick Up or Down to select Vector Scan.
2. Move the joystick Left or Right or press OPEN to enter.
IRIS CLOSE to Exit
3. Move the joystick Left or Right to select Vector Scan Tour to be operated
or programmed.
4. Move the joystick Up or Down to select Vector Scan Programming.
5. Move the joystick Left or Right or press OPEN to enter the Programming.
6. Move the joystick Up or Down to select sequence number desired to be edited.
Vector Scan
7. Move the joystick Left or Right to select programming
→
1. Number
(Name/Number/Speed/Dwell time)
2.
Program a Vector Scan
1) Name: P is the sign of PreShot Position
3.
Run a Vector Scan
V is the sign of Vector Scan
4.
Delete a Vector Scan
T is the sign of PTZ Tour
IRIS CLOSE to Exit
2) Number: Select the function based on name.
3) Speed: Setup the speed to meet the PreShot.
4) Dwell Time: Setup Dwell Time when PreShot and PTZ Tour done.
Run Vector Scan Operation:
1. Select the Vector Scan Tour to be operated on the Number.
Program a Vector Scan
2. Move the joystick Up or Down to select Vector Scan.
Name Num V Dwell
3. Move the joystick Left or Right or press OPEN to run the selected Vector
1
－ － － －
Scan Tour.
2
－ － － －
Delete Vector Scan Tour:
3
－ － － －
1. Select Vector Scan Tour to be deleted on the Option of Number.
4
－ － － －
2. Move the joystick Up or Down to select Vector Scan Delete.
IRIS CLOSE When Done
3. Move the joystick Left or Right or press OPEN to run the Vector Scan Tour.
Attention: Disable the command of Vector
Scan before you enter into main menu.
23
