manualshive.com logo in svg

Honeywell HS9VCU-01, User Manual

Share
Download
Honeywell HS9VCU-01 User Manual Download Page 62

10 – ERROR MESSAGES

56

https://extranet.honeywell.com

 

 

Table 5 

Mode error messages

Status

Icon

Caption

Meaning and Action

Overdriven 
modality

DEVICE IN 
OVERDRIVEN 
MODALITY

This device is set in overdrive mode. You do not 
need this device to authorize the transit.

Reply not 
received

REPLY NOT 
RECEIVED

Due to lack of response from the Supervision 
Center, the desired operation is cancelled. Retry 
the operation, and if the problem persists contact 
your system administrator.

Waiting for 
reply

WAITING FOR REPLY

The desired operation requires data from the 
Supervision Center. Please wait for approval 
before you continue.

For more information on your site operations, 
contact your system administrator.

Table 6 

Door error messages

Status

Icon

Caption

Meaning and Action

Door forced

DOOR FORCED

The door managed by this reader has been forced. 
Please notify security, then close the door to reset 
it.

Door locked

DOOR LOCKED

This door is locked; do not attempt to transit 
through this door.

Door not shut 
after crossing

DOOR NOT SHUT 
AFTER CROSSING

This door should be closed. Close the door to 
reset it and notify security. 

Summary of Contents for HS9VCU-01


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands