Honeywell HRXDS16, User Manual

Page: 55 / 172

Document 800-04559 Rev D 55
11/09
Configuration
4. To change the authority levels assigned to the group, highlight a Group Name,
then press
#
.
Figure 3-19 New Group Setup Screen
Caution Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the Factory
Reset Button and all data settings will be lost.
5. To add or change the password assigned to a user, highlight a User Name, then
press
#
. You can also change the group to which the user is assigned.
6. The column can be used to delete a User Name or an entire Group. If the is
grayed out, that Group or User cannot be deleted. Highlight , then press
#
. You
will be asked to confirm that you want to delete the User or Group.
To delete the User currently logged into the DVR on a local system or a PC
running RAS, log the user out of the system first and then delete the user.
7. To add a Group, highlight the + Group… box, then press
#
. A virtual keyboard
appears, allowing you to enter the Group name. You can use up to 15 characters
including spaces in the group name.
8. Now you can assign authority levels to the group. Highlight the Authority box,
then press
#
to toggle between all authority levels being turned On and Off. The
authority levels that can be turned On and Off are:
Authority Level Description
Shutdown The user can shut the system down on a local system.
Upgrade The user can upgrade the software on a local system or a PC
running RAS.
System Time
Change The user can change the system date and time on a local
system or a PC running RAS.
Data Clear The user can clear all video data or format disks on a local
system or a PC running RAS.
Setup The user without Setup authority cannot establish any
system settings excluding system shutdown and logout on
a local system or a PC running RAS.