Document 800-03097
Rev C
113
03/09
Operation
Recording
Recording Video
After installing the DVR (see
), you are ready to record. Unless you
change the setup using the Record setup screen (see
), the
DVR immediately begins to record video.
Although you can record without changing the unit from its original factory settings, you
can use the many tools to set the DVR for your recording needs. See
for detailed descriptions of the recording mode options.
Recycling the Hard Disk Drive
The factory default is
Recycle On
. When the hard disk drive is full, the DVR will record
over the oldest recorded video.
When set to
Recycle Off
, the DVR stops recording when the hard disk drive is full.
Setting the Resolution
The factory default resolution is Standard (CIF). When set to
Standard
, the DVR has a
maximum recording speed of 120 ips. When set to
High
(Half D1),the maximum
recording speed is 60 ips. When set to
Very High
(D1), the maximum recording speed
is 30 ips.
Panic Recording
Note
When the DVR is not in the
Recycle
)and all available storage space has
been used, panic recording will not operate.
To activate Panic recording of all cameras, press
. Press
again to stop panic
recording.
Summary of Contents for HRSD40F
