manualshive.com logo in svg

Honeywell HRG16, User Manual

Share
Download
Honeywell HRG16 User Manual Download Page 60

60  |  Performance Series DVR User Guide

www.honeywellvideo.com

Multi-camera Playback 

1. Select the cameras from the list for which you want simultaneous playback. 
2. Click   to stop the ongoing video playback.
3. Click 

 to start multi-camera simultaneous playback.

Note

•

Up to 16 cameras can be played back simultaneously.

•

The camera list operation is accessible by mouse only. Please do not 
operate by front panel.

•

If the camera numbered the lowest among the multiple cameras selected for 
simultaneous playback provides no recorded files for the current day 
selected on the calendar, then the warning message 

Playback failed

 

will be displayed on the screen.

•

The video for simultaneous playback by multiple cameras selected from the 
camera list refers to the all-day recorded files of the selected day.

Playback by System Log

To play back video from the System Log: 
1. Click 

Menu

 

 

Maintenance

 

 

Log Search

 to enter the Log Search menu (see 

Figure 5-6

).

Figure 5-6

Log Search Menu

2. Set 

Major Type

 to 

Information

, set 

Minor Type

 to 

Start Record

 or 

End Record

, and then 

select the 

Start Time

 and 

End Time

.

3. Click 

Search

.

A list of search results is displayed. 

4. Select the video log to play back, and then click 

Play

. 

The selected recording will begin to play in the Playback interface. 

Summary of Contents for HRG16









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands