Honeywell HREP16 User Manual Download | Manualshive

Page: 15 / 104

background image

HREP Color Digital Video Recorder User Guide

Document 800-06847 Rev B

15

08/10

EN55022 Class A Notice

WARNING!

This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.

Important Safety Instructions

•

Read these instructions.

•

Keep these instructions.

•

Heed all warnings.

•

Follow all instructions.

•

Do not use this apparatus near water.

•

Clean only with a dry cloth.

•

Do not block any of the ventilation openings. Install in accordance with the
manufacturer's instructions.

•

Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus that produces heat.

Caution

Do not alter the polarized or grounding plug.
A polarized plug has two blades with one wider than the other.
A grounding plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety.
When the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

•

Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

•

Only use the attachments/accessories specified by the manufacturer.

•

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus.

•

When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.

•

Unplug this apparatus during lightning storms or when unused for long periods of
time.

•

Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

•

This equipment is intended for indoor use and all the communication wirings are
limited to the inside of the building.

•

The socket-outlet should be installed near the equipment and should be easily
accessible.

«
...
13
14
15
16
17
...
»

Summary of Contents for HREP16









































































































Reviews:

No comments

Related manuals for HREP16

Brand: Odyssey Technologies Pages: 4

Brand: M-Audio Pages: 10

Brand: D-MAX Pages: 13

Brand: Pace Pages: 2

Brand: Fast Forward Video Pages: 12

Brand: Nuvico Pages: 70

Brand: IMS Pages: 55

Brand: Visiosat Pages: 28

Brand: Optiview Pages: 27

Brand: Optiview Pages: 342

Brand: WatchNet Pages: 134

DS-7208HWI-SV series

Brand: HIKVISION Pages: 241

Brand: Idis Pages: 66

Brand: Axis Pages: 84

Brand: Swann Pages: 75

Brand: Swann Pages: 1

Brand: PACOM Pages: 130

VMax Flex DW-VF16

Brand: Digital Watchdog Pages: 127

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands