background image

5

Interrupting the radio test

The radio test is terminated automatically after approx. 
10 minutes.
– or – 

 

f

Select 

exit

 using the adjustment dial and confirm 

with the 

 button.

Radio communication error

If the exclamation mark   and the radio symbol 

 

flash during normal operation, an error has occurred 
during radio communication.

• 

The room setpoint temperature of the HR92 radiator 
controller is changed automatically to 20 °C. 

 

f

Restore radio communication to the central operating 
device, see Section 7. 

Mounting the radiator controller

The radiator controller can be mounted on all common 
thermostatic valves with an M30 x 1.5 connection 
without draining system.

WARNING

Prevent damage to the radiator controller 
through humidity and moisture!

 

f

Mount the radiator controller indoors only.

 

f

Protect the radiator controller against 
humidity, moisture, dust, direct sunlight or 
exposure to excessive heat.

Removing the old thermostat head

1.

2.

1. Turn the old thermostat head counter-clockwise until 

it stops and loosen the mounting ring.

2. Remove the old thermostat head from the radiator 

valve.

Selecting the adapter

The radiator controller fits on common radiator valves 
of the type M30 x 1.5. Adapters are required for some 
valve types.
1. Check whether an adapter is required and, if 

necessary, select the appropriate adapter.

Brand

Illustration

Adapter

Honeywell-
Braukmann, 
MNG, Heimeier, 
Oventrop valves 
M30 x 1.5

Not 

required

Danfoss RA

Supplied

Danfoss RAV

*

Danfoss RAVL

*

* can be ordered under EVA1-Danfoss

2. Slide the adapter onto the radiator valve and turn it 

until you feel it click into place.

3. If necessary, screw the adapter tight with a screw. 

Summary of Contents for HR92














Reviews: