Honeywell HM609, Operating Manual, Page: 20 / 52

CLEANING AND
MAINTENANCE
How do I reassemble and start up the Steam Humidifier? Follow these steps to reassemble the tank and start
up the Steam Humidifier after cleaning:
Attach tank by raising the latch past the safety release
button.
Pull the white water valve forward to connect to the
the black spool. Then turn the manual shutoff valve to
the “Lock” position. If the handle turns hard, recheck
alignment.
Plug in the power cord.
The Power light will be on at start-up. If the humidity
control is also actively calling for humidity, the
Humidifying light will blink. This indicates that the
Steam Humidifier is waiting to act on the call to allow
time for the tank to complete filling.
Press the Go button to make the Steam Humidifier
ready for use. You must actively call for humidity
from the humidity control for the Steam Humidifier to
produce steam.
Note: You don’t have to press the Go button after plugging in the power cord.
The Steam Humidifier will wait for 5 minutes and then automatically restart
itself.
MCR29675
MCR29676
M29677A
Steam Humidification System 69-2286EF—07
18
2
3
4
5
1