Installation and Connections
14
is: 4 channels * 30 days * 12 hours * 200 M/h = 288G. So you need to
install one 300G HDD or 2 160G HDDs.
HDD Installation
Data ribbons, fastening screws and smart HDD shelf design are already
provided in the accessories.
Note
Please pay attention to HDD jumper:
If you just need to install one HDD, you can set the HDD to
MASTER.
If you install two HDDs to one IDE port, you need to set the
farther one as MASTER and the other as SLAVE. Please
don’t set HDD as CS Enable or Cap Limit.
Please follow the instructions below to install HDD.
1. Loosen the screws.
2. Remove the unit cover.
3. Dismantle the HDD bracket.
4. Install the first HDD. Note the
HDD is placed upside down.
Please make sure bracket is in
correct position.
5. Install the second HDD on
the bracket.
6. Fix the HDD bracket into the
internal unit.
7. Connect HDD cable to IDE
port
。
8. Connect power cord to the
HDD.
9. Place the unit cover back
and screws firmly.
