Honeywell HISD-1181W, Operation Manual, Page: 14 / 64

Operating Guide for IP Camera
8
•
Full Screen : Display images in full-screen, right click to exit full screen mode.
•
PTZ Control : Allows four-directional rotation, automatic adjustment of PTZ
rotation speed(see Figure 3-6).
•
Lens Control : Allows PTZ operations like Zoom, Focus, Aperture, Light, Clip,
Preset set, and Preset Call(see Figure 7).
•
Dome : See Figure 8 for the interface of “Dome”
•
Preset No .: You can set, delete and call presets.
•
Figure Scan : Support two groups of figure scan. If you enable this function, it can
record the operations of PTZ, but the operations don’t include PTZ rotate
automatically, preset tour, P&Z scan, PTZ reset, mostly special presets or call by
menu.
•
PAN Flip : Rotate horizontally 180
°
.
•
Zero Detection : If you set azimuth zero, the device will be rotated to thereafter
power on and tests by itself when click this button. If you delete the azimuth zero,
it will be rotated to the machine zero. You can set it in
Dome Camera

PTZ
Setting .
•
Left/Right/Up/Down Limit : The dome can be only rotated in the range as you set
when it is scanning.
•
Preset Tour 1/2 : Call preset tour 1 or 2, you can set preset tour in Dome
Camera

PTZ Setting .
•
P&T SCAN : Call P&T scan, you can set preset tour in Dome Camera

PTZ
Setting .
•
Stop : Stop the PTZ’s operation.
Figure 3-6
Figure 3-7