Honeywell HEATBUD XL HCE210 Series, Owner'S Manual

Page: 2 / 17

2
When using electrical appliances, basic precautions
should always be followed to reduce risk of fire,
electric shock, and injury to persons including the
following:
1. WARNING
– Read all instructions before using
this heater.
2. WARNING – NEVER leave an operating unit
unattended.
3. WARNING
– This heater is hot when in use. To
avoid burns,
DO NOT
let bare skin touch hot
surfaces. Allow heater to cool then use handles
when moving this heater. Keep combustible
materials, such as furniture, pillows, bedding,
papers, clothes, and curtains at least 3 feet
(0.9m) from the front of the heater and keep
them away from all sides of the heater.
4. WARNING – Extreme caution is necessary when
any heater is used by or near children or those
who are physically challenged.
5. WARNING – ALWAYS unplug heater when not
in use.
6. WARNING – DO NOT operate any heater
with a damaged cord or plug, any heater that
malfunctions, or any heater that has been
dropped or damaged in any manner. Discard
heater or return heater to authorized service
facility for examination and/or repair.
7. WARNING
– For residential use only.
8. WARNING – DO NOT use outdoors.
9. WARNING – NEVER locate heater where it may
fall into a bathtub or other water container.
10. WARNING – DO NOT run cord under carpeting. DO
NOT cover cord with throw rugs, runners, or similar
coverings. DO NOT route cord under furniture or
appliances. Arrange cord away from traffic areas
and where it will not be a tripping hazard.
11. WARNING – This appliance has a polarized plug
(one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
12. WARNING – This heater draws 12.5 Amps during
operation. To prevent overloading a circuit,
DO NOT plug the heater into a circuit that already
has other appliances working.
13. WARNING
– It is normal for the plug to feel
warm to the touch; however, a loose fit between
the AC outlet (receptacle) and plug may cause
overheating and distortion of the plug. Contact a
qualified electrician to replace loose or worn outlet.
14. WARNING – To disconnect the heater, first turn
off the product, then grip the plug body and pull it
from the wall outlet. NEVER pull by the cord.
15. WARNING – DO NOT insert or allow foreign objects
to enter any ventilation or exhaust opening as
this may cause electric shock, fire, or damage
to the heater.
16. WARNING
– To prevent a possible fire,
DO NOT
block air intakes or exhaust in any manner.
DO NOT use on soft surfaces, like a bed, or where
openings may become blocked.
17. WARNING – A heater has hot and arcing or
sparking parts inside. DO NOT use it in areas
where gasoline, paint or flammable liquids are
used or stored.
18. WARNING – Use this heater only as described in
this manual. Any other use not recommended
by the manufacturer may cause fire, electric shock,
or injury to persons.
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING
THIS HEATER
WARNING – READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER.
IF YOU DO NOT UNDERSTAND THESE INSTRUCTIONS OR PRODUCT LABELS PLEASE CALL OUR CUSTOMER
REPRESENTATIVES AT 1-800-477-0457 FOR ASSISTANCE BEFORE USING THIS PRODUCT.
WARNING – FAILURE TO FOLLOW ANY OF THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, INJURY, OR DEATH.
YOUR RESPONSIBILITIES
Electrical appliances may expose people to hazards that can cause severe injury as well as death. The use
of electrical products may create hazards that include, but are not limited to, injury, fire, electric shock and
electrical system damage. These instructions are intended to provide you with the information you need to use
the product correctly and to avoid such hazards.