Honeywell HDZ302LIK, Configuration Manual

Page: 19 / 38

Configuring Camera Settings Using the OSD | 19
800-21699 - A - 04/2016
System Settings
In the main OSD menu, move the cursor to SYSTEM SETTING, and then click the confirm
button.
SYSTEM INFORMATION
Move the cursor to SYSTEM INFORMATION and click the confirm button to go to the submenu,
where you can view or modify the following settings:
ADDR INFORMATION
Move the cursor to ADDR INFORMATION and click the confirm button to go to the submenu,
where you can view or modify the following settings:
SET NORTH
Sets the benchmark north so that you can know the angle between the benchmark and the
PTZ’s current position. Move the cursor to the option and click the confirm button. The OK
message appears. Now north is set.
LANGUAGE
Sets the OSD menu language. Click the left/right button to set.
FACTORY DEFAULT
Restores the factory default settings. Move the cursor to the option and click the confirm button.
The OK message appears. The camera reboots automatically.
CAMERA RESTART
Reboots the camera.
• ADDR
• BAUD RATE
• PARITY
• SOFTWARE
• ADDR TYPE The system supports software addresses only.
• ADDR-SOFT Displays the software address of the camera. Use the left/right
buttons to set (1–255).