manualshive.com logo in svg

Honeywell HCX13M, Operator'S Manual, Page: 4 / 48

Share
Download
Honeywell HCX13M Operator'S Manual Download Page 4

4

Explanation of Graphical Symbols

Important Safeguards

•

Read and keep these instructions.

•

Heed all warnings.

•

Follow all instructions. 

•

Do not use this apparatus near water.

•

Clean only with dry cloth.

•

Do not block any ventilation openings. Install in accordance with the manufacturer’s 
instructions.

•

Do not install near any heat sources such as radiators, heat registers, stoves, or 
other apparatus (including amplifiers) that produce heat.

•

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, 
or sold with the apparatus.

FCC Compliance Statement

Information to the User: This equipment has been tested and found to comply with the 
limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules, these limits are 
designed to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, uses, 

Summary of Contents for HCX13M

















































Reviews:

No comments