REV.
A
32
HCMU001002
06/24/04
LENS INSTALLATION AND ADJUSTMENT, CONTINUED
DC type lens: Set lens switch to DC.
Connect the lens cable of a DC (galvanometric) type lens. If the plug on the cable is of a
different type, replace it with the provided 4-pin iris plug.
1
2
4
3
Pin Assignment : DC type (4-pin)
Pin No. Signal
1
Damping coil (-)
2
Damping coil (+)
3
Drive coil (+)
4
Drive coil (-)
Damping coil (-)
Damping coil (+)
Drive coil (+)
Drive coil (-)
1
3
2
4
After installing the connector plug, connect it to the lens connector on the rear
panel of camera.
