Honeywell HC900, User And Installation Manual

Page: 155 / 274

Revision 6 HC900 Process & Safety Controller User and Installation Manual 141
21 April 2017
Step Action
8
Key in the following command string:
AT Y0
Then, press the ENTER key.
The modem should respond with OK.
9
Key in the following command string:
AT &B1
Then, press the ENTER key.
The modem should respond with OK.
10
Key-in the following command string:
AT E0 Q1 &W0
The Modem will not respond.
11
Power down the modem and disconnect it from the PC.
12
Set the modem switches to the following:
Switch Setting Position Function
1 ON DOWN Modem ignores DTR (Override)
2 OFF UP Verbal (word) results
3 OFF UP Suppresses result codes
4 ON DOWN Suppresses echo
5 OFF UP Modem answers on first ring
6 ON DOWN CD always ON (Override)
7 OFF UP Loads Y0-Y4 configuration from user-defined
nonvolatile memory (NVRAM)
8 OFF UP Disables command recognition (dumb mode)
13
Connect the modem to the?
14
Connect the modem to a telephone jack.
15
Power up the modem and the HC900 Controller.
16
On a remote computer, run Designer Software.
17
Set up Designer Software to dial the HC900 Controller.
18
Verify that communications is established with the remote HC900 Controller.