Performance Series IP Camera Software Configuration Guide
12
Table 3-3 Live View Window Configuration Tools
Image Control
Click to open the
Image Adjustment
panel.
Move the sliders to adjust the image brightness,
contrast, hue, or saturation. Click the
–
and
+
signs to
make fine adjustments. To restore the settings to their
default values (
64
), click
Reset
.
Note
These settings only apply to the client end. To
change the settings at the camera end, go to
Setup
Camera Setup
Properties
.
Original Size
Click to display the video at actual size (the exact
dimensions are determined by the stream resolution).
Full Screen
Click to display the video in full-screen mode. Double-
click (or press Esc) to exit full-screen mode.
Width and
Height Ratio
Displays the video in its original size (
Original
) or fitted
to your screen (
Adaptive
).
Adjust
Fluency
Sets the video fluency level (
Realtime
,
Normal
, or
Fluency
).
Select a fluency level based on the capabilities of your
network.
For example, if your connection is slow, selecting
Fluency
will prioritize smoothness over image quality.
Zoom and
Focus
Opens the
Zoom and Focus
panel.
Move the sliders to adjust the zoom and focus settings.
Click the – and + signs to make fine adjustments. The
Step
number determines the magnitude of the
adjustment. To set the focus automatically, click
Auto
Focus
. To restore the default zoom and focus settings,
click
Restore All
. To focus on a specific region, click
Regional Focus
, and then drag your mouse over the area
in the video window.
Note
This option is available only for
HEW4PER2/HEW2PER2/H4W2PER2/HBW2PER2/H4W
8PR2/HBW8PR2.
