manualshive.com logo in svg

Honeywell GMPT-401, User Manual, Page: 30 / 50

Share
Download
Honeywell GMPT-401 User Manual Download Page 30

Chapter 3 — Operation

24

GMPT-401 Personal Tracker User Guide

Alert Mode can also be activated by pressing and holding the SOS button on 
the tracker for 2 seconds.

To avoid accidentally activating Alert Mode with the SOS button on the tracker, 
you can turn on the Tracker SOS Button Press notification in the 

Settings

 

menu, see 

“Notifications” on page 30

. When enabled you must confirm your 

action in the GMPT-401 app on the phone.

About Alert Mode

Alert Mode can be used in urgent situations to alert the ViewPoint operator that 
an important event has occurred. Alert Mode has the following effects:

•

An SOS message and tracking position message are transmitted to 
ViewPoint, irrespective of whether a GPS fix is obtained. Your last-known 
position is sent if there is no GPS fix.

•

The interval between routine tracking messages may change, depending on 
how the system has been configured in the app. Alert Mode settings are 
configured in 

Settings

, 

Connection Interval

,

 Alert Report Rate

 (see 

“Connection Interval” on page 28

).

•

SOS message settings (content and who the message is sent to) can be 
configured in 

Settings

, 

SOS Message

.

Keep in mind that Alert mode often uses more battery power than normal 
operation, reducing the battery life.

Canceling Alert Mode

Alert mode is deactivated automatically depending on how it is configured. See 

“Alert Configuration” on page 30

.

Summary of Contents for GMPT-401



















































Reviews:

No comments