8
FINAL INSTALLATION
10
.
Feed the pull chains through the off-center holes of the glass bowl. Lift the glass bowl onto the threaded rod of the light
kit and secure it using the rubber washer and hex nut. Lift the finial cap over the threaded rod and secure it with the finial
(Figure 5.10).
11. Attach the pull chain extensions to the pull chains.
Note:
When facing the reverse switch, the light pull chain is on the left
and the fan pull chain is on the right (Figure 5.11).
12. Turn on power to fan at breaker box and the wall switch (Figure 5.12). Assembly is complete.
Figure 5.11
Figure 5.10
Figure 5.12
Fan Pull Chain
Reverse Switch
Light Pull Chain
Glass Bowl
Rubber Washer
Hex Nut
Finial Cap
Finial
Figure 6.2
Figure 6.1
Reverse Switch
Reverse Switch
Light Pull Chain
Fan Pull Chain
OPERATING INSTRUCTIONS
1. The fan pull chain has four positions to control fan speed. One pull is high, two is medium, three is low and four turns the fan
off. The light pull chain has two positions to control the light, on and off (Figure 6.1).
2. Use the reverse switch to optimize your fan for seasonal performance.
In warmer weather,
push the reverse switch left which
results in downward airflow creating a wind chill effect.
In cooler weather,
push the reverse switch right which results in
upward airflow that will help move hot air of the ceiling (Figure 6.2).
