VA Indications
(green) (red)
Pressing one or more of the 10 buttons selects the local
Voice
Alarm Zone(s)
of the local system to which emergency or auxiliary
messages, or emergency microphone is to be announced. The two
LEDs beneath flash alternately to show the
Voice Alarm Zone
has
been selected.
On selecting the required emergency or auxiliary message only one
of these LEDs changes to steady or flashing indication determined
by the type of audio to be outputted to the selected
Voice Alarm
Zones
. The left LED indicates auxiliary message selection while the
right LED indicates emergency message selection.
(green)
Pressing the 'All Zones' button allows quick selection of all
Voice
Alarm Zones
of the local system
.
The accompanying LED gives a
steady indication when the button is pressed. Note all the
Voice
Alarm Zones
that have been setup in your system will give a
flashing indication and those not set up will give no indication.
Pressing 'Clear Zones' button will clear selected
Voice Alarm Zones
of the local system and stop announcements.
10
Operating instructions
All Zones
Clear Zones
Voice Alarm Zones
Speak Now
Auxiliary messages
Emergency messages
1
4
2
3
5
6
9
7
8
10
1
2
3
1
2
3
ALERT
BOMB
EVACUATE
TEST START
STAND DOWN
TEST END
VA Activated
n
All Zones
Clear Zones
