2
I56-3555-004
©2017 Honeywell. 04-21
Gamewell-FCI
®
, Honeywell
®
, and Velociti
®
are registered trademarks of Honeywell International, Inc.
Setting the MS-7AF Address
The MS-7AF Addressable pull station is factory preset with address ‘00.’ Set the ad-
dress for the pull station by turning the rotary address switches on the addressable
module mounted inside the pull station. Only one device per address is allowed.
Multiple modules may not be set to the same address on the Signaling Line Circuit.
Once the address is set, record it in the space provided on the product ID label lo-
cated inside the pull station.
LED OPERATION
Normal:
Flash RED
Alarm:
Steady RED
Note: LED is visible
through translucent
handle.
Note – Opening the
pull station door
will not activate or
deactivate the alarm
switch.
P0104-00
