107111-11-EN FR26 GLO 503 Printed in Germany
FF-SRM200P2
Muting Module
Instructions for use
(pending)
Category 4
per EN 954-1
Suitable for interfaces
up to
IMPROPER INSTALLATION
•
Consult with US and/or European safety agencies and
their requirements when designing a machine control,
interface and all control elements that affect safety.
•
Strictly adhere to all installation instructions.
Failure to comply with these instructions could result
in death or serious injury.
PRODUCT DESCRIPTION
The FF-SRM200P2 muting module is a programmable
safety control module offering various muting modes and a
mutual exclusion mode in one device. It is designed to be
used together with many types of safety devices with static
or relay outputs (safety light curtains, safety laser scanners,
safety mats, safety switches) and auxiliary sensors. Mode
depending, one or two safety devices protecting a
hazardous area and up to four additional auxiliary sensors
(e.g. for starting or ending a muting sequence) can be
connected to this module.
In the muting mode, the module is an interface between
one or two safety devices and the control circuitry of a
hazardous machine for which it is necessary to inhibit the
safety device(s) at certain steps of the process.
In the mutual exclusion mode, the module can monitor up
to two safety devices (typically light curtains, switches)
protecting hazardous areas which are accessible by both
operators and machines. The operators access to the area
is only allowed during the safe period of the machine cycle
without stopping the hazardous movement.
The FF-SRM200P2 muting module has two internal safety
relays with three normally open positive-guided output
contacts, providing an emergency stop signal to the
machine control circuitry.
The FF-SRM200P2 helps to create a control reliable safety
solution by providing redundancy and self-checking
circuitry. Other features include a manual start mode, an
external device monitoring capability, an optional test
output and an extensive diagnostic help through indicators.
APPROVALS
CE
The product, packaging and
documentation of FF-SR Series
products is CE mark following an
examination by BG (German
Berufsgenossenschaft).
cURus
(pending)
This product is pending approval by
Underwriters Laboratories Inc.
According to Canadian and US
safety requirements.
DIRECTIVES COMPLIANCE
Machinery Directive 98/37/EC
Low Voltage Directive 73/23/EC
Electromagnetic Compatibility Directive 89/336/EC
REGULATIONS COMPLIANCE
Regulation
Title
OSHA 29 CFR
1910.217
Requirements and Safeguarding
of Mechanical Power Presses
STANDARDS COMPLIANCE
Standard
Title
EN 292
Safety of Machinery - Basic
Concepts, General Principles
for Design
EN 60204-1
Safety of Machinery - Electrical
Equipment of Machines
EN 954-1
Safety of Machinery - Safety
related parts of control system
EN 61496-1
Electrosensitive Protective
Equipment – General Requirements
ANSI B11.1
Construction, Care and Use of
Mechanical Power Presses
ANSI B11.2
Construction, Care and Use of
Hydraulic Power Presses
ANSI B11.19
Safeguarding Performance
Criteria for the Design,
Construction, Care and Use
ANSI/RIA R15.06
Safety Requirements for
Industrial Robots and Robot
Systems
UL 508
Industrial Control Equipment
NFPA79
Electrical Standard for Industrial
Machinery