F200E CHARGED-MEDIA AIR CLEANER
68-0238
8
68-0238 G.H. 10-00
Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.
Home and Building Control
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Scarborough, Ontario
M1V 429
Home and Building Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
Honeywell
Choose better indoor air for your family
by installing Honeywell solutions.
You'll enhance your comfort and peace of mind.
Ultraviolet Air Treatment System
Zap airborne germs and prevent mold
spore growth on air conditioning coils
Whole-House Air Cleaner
Trap a high percentage of airborne
particles
Whole-House Humidifier
Moisturize parched air, maintaining
40% to 60% humidity to minimize
adverse health effects
Zoning System
Control temperature by area in your
home, adding convenience and
improving comfort
PerfectWindow
®
Air Exchanger
Ventilate your home to assure fresh air
while minimizing energy loss
Programmable Thermostat
Save up to 30% in annual energy costs
with this easy-to-use thermostat that's
accurate to within ±1°
Table 1. AIRWATCH Indicator LCD Description.
AIRWATCH™ Indicator
Condition
Meaning/Action
No indicator on.
AIRWATCH™ has no power; replace battery.
On/Battery indicator on continuously.
AIRWATCH™ is functioning normally.
On/Battery indicator flashing.
Flashing two seconds on, six seconds off: Replace battery in the F200E door. Do not
press any reset buttons after battery change.
Flashing two seconds on, two seconds off: Replace battery in AIRWATCH. Do not
press any reset buttons after battery change.
Flashing alternates between two seconds on, six seconds off; then two seconds on,
two seconds off: Replace the batteries in both units. Do not press any reset buttons
after battery change.
Air Cleaner indicator flashing.
Signal was received from transmitter, indicating either excessive pressure drop or 12-
month timer in F200E expired. Replace filter and press reset button on F200E door.
UV Air Treatment indicator flashing or
Humidifier indicator flashing.
UV lamp(s) or humidifier pad needs replacing. Replace parts.
On the AIRWATCH, push and release button until desired device indicator is flashing.
Then press button again and hold until Indicator comes on continuously; then release.
All indicators flashing.
System is in check-out mode. Indicators flash for two minutes, then AIRWATCH
automatically resets.
