background image

PRODUCT DATA

® U.S. Registered Trademark
Copyright © 2000 Honeywell   •   All Rights Reserved

F200E

Charged-Media

Air Cleaner

APPLICATION

The F200E Charged-Media Air Cleaner captures a significant
amount of the air-borne particles from the air circulated through
the unit.

FEATURES

Charged-Media filter captures particles as small as 0.3
micron.

Efficiency and arrestance ratings based on the
American Society of Heating, Refrigerating and Air
Conditioning Engineers Standard 52.2-1999.

Applicable to all gas, oil, and electric forced warm air
furnaces and to compressor cooling up to 5 tons.

Mounts in the return air duct.

Cabinet can support weight of residential furnace and
evaporator coil.

Requires no electrical connections.

Mounts in any position.

Requires no maintenance except periodic media filter
replacement.

Quick and easy media filter replacement.

Later upgrade to electronic air cleaner is easy.

Integral pressure sensors signal when filter change is
required based on increased pressure drop threshold
at filter.

Filter change status is transmitted to wall-mounted
AIRWATCH™ Indicator.

The RF AIRWATCH™ Indicator is included.

SPECIFICATIONS

IMPORTANT

The specifications in this publication do not include
normal manufacturing tolerances; therefore, an
individual unit may not exactly match the listed
specifications. This product is tested and calibrated
under closely controlled conditions, and some minor
differences in performance can be expected if those
conditions are changed.

Model:
F200E Charged-Media Air Cleaner includes a cabinet,
access door and pleated media filter, and an RF AirWatch™
Indicator.

Application:
Use with gas, oil, and electric forced warm air furnaces and
with compressor cooling. Can be used with heat pumps if
filter is changed regularly to prevent excessive pressure drop.

Efficiency:

Efficiency Ratings: Based on American Society of Heating,

Refrigerating and Air-Conditioning Engineers Standard
52.2-1999.

Initial Efficiency: 43 percent (0.3 micron particles);

   76 percent (1.0 micron particles)

Minimum Efficiency Reporting Valve (MERV): 10 at 492 fpm.
Initial Dust Spot Efficiency: 61% (ASHRAE 52.1).

68-0238

whole-house air quality system

Summary of Contents for F200E









Reviews: