manualshive.com logo in svg

Honeywell Excel 10 W7752D, User Manual, Page: 66 / 68

Share
Download
Honeywell Excel 10 W7752D User Manual Download Page 66

EXCEL 10 FCU CONTROLLER LNS PLUG-INS USER GUIDE 

EN2B-0285GE51 R0909 

64 

Table C4. Output Variables for Excel 10 FCU Controllers.

 

NV name 

field name 

engineering units: 

English (metric) or states plus 

range 

digital 

state 

or 

value 

default comments

 

(continued) 

 

 

nroPgmVer 

 
 
 
 
 
 

1.  Network variables are unchanged. 
2.  Functionality of the control algorithm has been revised and 
 

affects compatibility with other nodes or the equipment being 

 controlled. 
 
3.  The network interface or physical input / output subsystem 
was revised and affects compatibility with other nodes. 

NOTE:

 Bug fixes may also be included in a minor functional 

release. 

nroPgmVer 

bug_ver 

UBYTE, 0 to 255 
 
 
 

 

 

Bug Fix Number: 
Network variables are unchanged. A change to the algorithm, 
network interface, or physical input/output subsystem was made 
that does not affect compatibility with other nodes or the equipment 
controlled by the node. 

nroPgmVer 

node_type 

UBYTE, 10 = FCU2 

 

 

Node type number. 

 

 

Summary of Contents for Excel 10 W7752D





































































Reviews:

No comments