background image

Installation and Commissioning

Instructions

Note: QuickSet Pro required for commissioning

LightSpot Digital Luminaire Controllers 

MSM2000A - Control Module

DHW/DHS - Mini Detector Head

for use with Analogue 1-10V and Fixed-Output 

Electronic High-frequency Ballasts

Summary of Contents for Ex-Or MSM2000A

Page 1: ...g Instructions Note QuickSet Pro required for commissioning LightSpot Digital Luminaire Controllers MSM2000A Control Module DHW DHS Mini Detector Head for use with Analogue 1 10V and Fixed Output Electronic High frequency Ballasts ...

Page 2: ...y be reflected from the room i e there must be no direct illumination 4 In order to receive satisfactory light level regulating operation a detector must observe a substantially greater proportion of artificial light from the luminaire s under its control than from neighbouring luminaires not under its control This is particularly important when planning the installed layout of linear luminaires t...

Page 3: ... download operation took place Tip turn the lights off first using the IR Remote HC5 menu found in Utilities if you want to measure the perceived ambient light level with no contribution from the controlled lighting Note When setting the regulating light level as described in the previous section the Threshold is also set to the current measured level OneSwitch Dimming OneSwitch dimming affords lo...

Page 4: ...0 C CAPACITY Total load must not exceed 2 AMPS up to 4 Ballasts MAX Electronic high frequency ballasts ONLY o INTERCONNECT CABLE TEMPERATURE RATING 60 C COLOUR White RAL9010 or silver bezel DHW White DHS Silver MATERIAL UV stabilised polycarbonate DHW DHS Flame retardant PC ABS MSM2000A IP RATING 20 DIMENSIONS See diagrams overleaf WEIGHT 32g incl 0 8m cable DHW DHS 48g MSM2000A 6 0m 2 5m Honeywel...

Reviews: