Positioning, Fixing & Connections
Technical Data
Accessories
Dimensions
HC5 Universal Hand-held Controller
Allows manual override.
Ex-Or operates a genuine policy of continuous improvement. You may expect the specification to be regularly enhanced. For latest technical information, please visit www.ex-or.com.
Ref: D4123B
Part Numbers
o
MLS2001CDR
360 PIR Detector - flush
o
MLS2001CDRSM
360 PIR Detector - surface
o
MLS2401CDR
360 Microwave Detector - flush
o
MLS2401CDRSM
360 Microwave Detector - surface
MLS2500CDR
Directional Microwave Detector - semi-flush
MLS2500CDRSM
Directional Microwave Detector - surface
BT5E030GY
3m Detector Patch Lead
BT5E050GY
5m Detector Patch Lead
BT5E100GY
10m Detector Patch Lead
HP2000
MLS Digital Programmer
HC5
Universal Hand-held Controller c/w wall bracket
MLS2001CDR & MLS2401CDR
MAX RECOMMENDED MOUNTING HEIGHT: 3.0m
RANGE: Cone-shaped detection pattern. Diameter (at floor level) =
2.4 x mounting height (MLS2001CDR) 2.8 x mounting height (MLS2401CDR)
OPERATING VOLTAGE: 12V DC, SELV if installed correctly
PHOTOCELL: Regulating
DEPTH REQUIRED BEHIND CEILING (FLUSH VERSIONS):
62mm plus an allowance for the minimum bend radius of the patch lead
WEIGHT: 170g approx - MLS2001CDR
200g approx - MLS2401CDR
COLOUR: White
MATERIAL: Flame retardant PC/ABS
IP RATING: 3X - MLS2001CDR
2X - MLS2401CDR
6.0m
2.5m
7.0m
2.5m
MLS2500CDR
MAX RECOMMENDED MOUNTING HEIGHT: 3.5m
RANGE: Adjustable up to 20m
OPERATING VOLTAGE: 12V DC, SELV if installed correctly
PHOTOCELL Regulating
DEPTH REQUIRED BEHIND CEILING (SEMI-FLUSH VERSION):
40mm plus an allowance for the minimum bend radius of the patch lead
WEIGHT: 130g approx
COLOUR: White
MATERIAL: Flame retardant PC/ABS
IP RATING: 4X
MLS2001CDR
MLS2401CDR
II I
I
I
Ex-Or
Haydock Lane
Haydock
Merseyside
WA11 9UJ
Tel: 01942 719229
Fax: 01942 272767
To CD
Box
Do Not
Connect
Do Not
Connect
Bayonet Fixing
Lugs
Socket for
Patch Lead to
LCM
View on back of
MLS2001CDR
MLS2401CDR
Detectors
Socket for
Patch Lead to
LCM
Arrow Symbol
View on Back of
MLS2500CDR
Detector
Locking
Screw
To CD
Box
Do Not
Connect
No Serviceable Parts Inside.
DO NOT OPEN
Power consumption <10W
II I
I
ta 0..40 C
Bayonet Tab
Receptacles
I
MLS2500CDR
60
95
50.8
74
20mm
back
entry
Rear View
Positioning Notes
Do not mount within 0.25m of a luminaire.
The MLS2401CDR should not be positioned on a pitch narrower than 5m.
Microwave detectors (MLS2401CDR & MLS2500CDR) are extremely sensitive to movement and
must be installed on a rigid surface that will not itself be subject to movement. Microwaves can
penetrate lightly built partitions, glass etc and thus movement in adjacent spaces can cause
spurious triggering if the orientation and sensitivity settings of the detector are not carefully
managed. They are not recommended for areas where there are large areas of metal such as
metal ceiling panels as unpredictable sensitivity may result.
Fixing (Outline guidance - see installation instructions for full details)
MLS2001CDR & MLS2401CDR
Flush Versions
- Depth required behind ceiling: 62mm from front flange plus an allowance for the
minimum bend radius of the cable. Sinking box fits into a 89mm diameter hole in ceiling tile or
plasterboard ceiling. To avoid damage to ceiling tile, do not overtighten. No access above the
ceiling is necessary. The unit fits into the housing with a simple bayonet action.
Surface Versions
- The housing may be secured to a hard surface or a BESA box. The unit fits into
the housing with a simple bayonet action.
MLS2500CDR
Semi-flush Version -
Use a hole saw to drill a 76mm hole into the ceiling tile. The flush ring is
designed to clamp the tile between its two halves.
Surface Version -
The back-box can be secured directly to a hard surface or to a conduit stop
end box.
62mm
deep
62mm deep
behind ceiling
100mm
MLS2001CDR
MLS2001CDRSM
Flange:
10mm
deep
100mm
62mm
deep
100mm
100mm
MLS2401CDR
MLS2401CDRSM
Flange:
15mm
deep
62mm deep
behind ceiling
MLS2500CDR
HP2000 MLS Digital Programmer
Menu-driven LCD Programmer with
automatic equipment recognition and
parameter download facilities.
