Honeywell ERX, User Manual, Page: 41 / 84

41

366 P2 Pressure Coefficient 26 30.00000
367 P2 Pressure Coefficient 27 0.000000
368 P2 Pressure Coefficient 28 0.000000
369 P2 Pressure Coefficient 29 0.000000
370
P2 Pressure Coefficient 30 30.00000
371
P2 Pressure Coefficient 31 0.000000
372
P2 Pressure Coefficient 32 0.000000
408 P3 Pressure Unit
Selection for the unit-of-measure for P2 pressure item 501, if changed to a different type,
all P2 pressure-related items are converted and displayed to the new unit-of-measure.
See below for possible pressure unit choices.
Default: 0-PSIG
1-PSIA
2-kPA
3-mPa
4-Bar
5-mBar
6-KGcm2
7-in WC
8-in HG
9-mm HG
10-Oz
410 P3 Pressure Calibration Date
Date of the most recent P3 calibration
Default: 01-01-04
411 P3 Pressure Transducer Serial Number
Default: 00000000
412 P3 Pressure Range
P3 transducer in PSI
Default: 333.00
414 P3 Pressure Zero Offset
The most recent span value for P3 pressure transducer and obtained during a pressure
span calibration. A value that is normally very close to 0.0000 and recalculated on each
Pressure Span Calibration
.
Default = 0.0000
415 P3 Pressure Previous Zero Offset
The previous P3 zero offset value recorded in item 414, updated on each calibration.
Default: 0.0000