800-16795 - A - 02/2014
| 11
3.
Securely fasten the pendant arm to a mounting surface.
•
Use appropriate screws (not supplied) to securely fasten the pendant arm to the wall,
which you prepared in
Preparing the Wall for the Pendant Arm
OR
•
Use appropriate screws, nuts, and washers (not supplied) to securely fasten the
pendant arm to the pole mount, which you prepared in
4.
Install the pendant arm cover plate on the pendant arm. Slide the tab into the hole on the
pendant arm, them lay the cover flush with the pendant arm’s surface. Use the M3x9.5 P
Head Mechanical Screw to secure the cover in place.
Attaching the Pendant Mount+Sunshield to the Pendant Arm
1.
Thread the ethernet cable through the entry in the pendant mount+sunshield.
Figure 19
Threading the Ethernet Cable Through the Pendant Mount+Sunshield
2.
Align the pendant mount+sunshield with the pendant arm, and screw the pendant
mount+sunshield securely into place.
