manualshive.com logo in svg

Honeywell EQUIP HD3MDIH, User Manual, Page: 24 / 80

Share
Download
Honeywell EQUIP HD3MDIH User Manual Download Page 24

24

Installation and Setup

Mounting the Camera

Surface Mount

1. Secure the skirt to the ceiling (hardware 

not supplied) or to the wall using the 
supplied screws. 

Note

You must use screws that are able to 
support at least three times the weight 
of the camera. 

2. Connect the wires (see 

Connecting the 

Wires 

on page 

19

).

3. Rotate and align the camera assembly 

yellow label with the skirt yellow label. 

4. Secure the camera assembly to the skirt by 

pushing it into the skirt, then twisting it 
clockwise until it clicks securely in place.

5. Secure the camera assembly to the skirt by 

twisting it clockwise until it clicks securely 
in place.

6. Adjust the camera’s field of view (see 

Adjusting the Camera FOV (Field of View) 

on 

page 

25

). 

7. Install the turret by clicking it into place.
8. Install the bubble by placing it on the camera with the tabs to the left of the slots, then 

turning it clockwise until the tabs click securely into place.

Skirt

Camera 
assembly

Turret

Dome bubble

Screws 
(supplied)

Summary of Contents for EQUIP HD3MDIH

















































































Reviews:

No comments