Honeywell EQUIP HD3HDIHX, User Manual, Page: 23 / 116

HD3 equIP
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361V5 Rev A 23
07/2013
2. Connect to the power supply (see Figure 2-6 on page 23 ).
3. Plug the power supply into an appropriate power source. The LED on the RJ45 jack
illuminates when the camera receives power. If it does not illuminate, check the
terminal block connections and the power source.
Note To ensure satisfactory performance, it is recommended that you use a UPS
source when connecting the camera to a 24 V AC power source.
Figure 2-6 Camera and Cables
24 V AC power
RJ45 Ethernet network
connection (using 10Base T
or 100Base TX cable). See
Connecting to a Network via
an RJ-45 Ethernet
Connector
, page 24 )
Also for Power over
Ethernet (PoE 802.3af)
Connector Strip
Audio: Input/Output
Alarm: Input/Output
(see
Connecting Alarms ,
page 21 )
Back view of camera