RMA805 Enraf FlexLine Remote Indicator Quick Start Guide
1
RMA805 Enraf FlexLine Remote Indicator
Quick Start Installation Guide
34-ST-25-66, Revision 2, August 2020
This document provides a procedure for the
Installation of Honeywell’s RMA805 Enraf
FlexLine Remote Indicator.
It provides a means of remote-mounting a
display that is associated with a Honeywell
Enraf FlexLine Gauge.
For full details refer to the manuals listed
below for user Interface (HMI) operation,
Installation, configuration, maintenance,
parts, and safety and approvals etc.
including options
Copyrights, Notices and Trademarks
.
Copyright 2020 by Honeywell Revision 2,
August 2020
Trademarks
Enraf, FlexLine SmartLine, RMA are U.S.
registered trademarks of Honeywell Inc.
HART ® is a registered trademark of the
FieldComm Group™
Table of Contents
Installation Site Evaluation................................................................... 1
Display Installation Precautions ........................................................... 1
Mounting Remote Indicator.................................................................. 1
Bracket Mounting ................................................................................. 2
Wiring the RMA805 Enraf FlexLine Remote Indicator .................................. 2
Wiring Procedure ................................................................................. 2
Explosion-Proof Conduit Seal ......................................................................... 2
Jumper Settings .............................................................................................. 3
Configuration Guide ........................................................................................ 3
Appendix A. PRODUCT CERTIFICATIONS .................................................. 3
A1 Hazardus Locations Certifications ................................................ 3
EU DECLARATION OF CONFORMATY ……………………………4
A2 Marking ATEX Directive ................................................................ 5
A3 Conditions of Use” for Ex Equipment”, Hazardous Location
Equipment or “Schedule of Limitations” ............................................. 5
A4 Control Drawing ............................................................................. 6
Figure 1: Typical Bracket Mounted Installations ............................................. 1
Figure 2: Pipe Mounting Bracket Secured to a Horizontal or Vertical Pipe .... 2
Figure 3: Two Position FF Terminal Block ...................................................... 2
Documentation
To access complete documentation, including language variants, scan
the QR code below using your smart phone/device or QR code scanner.
Go to the APP store for your free Smartphone QR scanner
Or you can follow the URL to access the online Tank Storage Documentation.
The Documentation page will contain direct links to open the product
documentation.
URL
QR Code
https://www.hwll.co/TankStorageDocs
Installation and Startup
Installation Site Evaluation
Evaluate the site selected for the RMA805 Enraf FlexLine Remote Indicator installation
with respect to the process system design specifications and Honeywell’s published
performance characteristics for your particular model. Some parameters that you may
want to include in your site evaluation are:
•
Environmental Conditions:
o
Ambient Temperature
o
Relative Humidity
•
Potential Noise Sources:
o
Radio Frequency Interference (RFI)
o
Electromagnetic Interference (EMI)
•
Vibration Sources
o
Motorized System Devices (e.g., pumps)
Display Installation Precautions
Temperature extremes can affect display quality. The display can go blank if the
temperature is below -20°C or above +70°C; however, this is only a temporary condition.
The display will again be readable when temperatures return to within operable limits.
Mounting Remote Indicator
Summary
Remote Indicator models can be attached to a two-inch (50 millimeter) vertical or
horizontal pipe using Honeywell’s optional pipe mounting bracket. Honeywell’s optional
wall mounting bracket is also shown below.
Figure 1 shows typical bracket-mounted installations.
Figure
1: Typical
Bracket
Mounted Installations
