Motor Screw
Cut Out
Blade Arm
Blade
BLADE INSTALLATION
Fig. 13
Cutout
Blade
Twist Lock
Connector
Blade Arm
Fig. 12
99
12. The blades attach to blade arms using the Fast
Attach
TM
system.
Align each twist lock connector in the direction of
its corresponding hole in the blade. Place the blade
over the twist lock connectors. Rotate each twist
lock connector so that it is perpendicular to the
hole in the blade. Repeat for the remaining blades
(Fig. 12).
Note:
A cut out in the fitter plate allows easy access
to the motor screw holes.
13. Insert the two previously removed motor screws
through one blade arm and then into the motor.
Tighten motor screws securely. Repeat with
remaining blade arms, making sure to completely
secure each blade arm before proceeding (Fig. 13).
Motor Screw
