Honeywell Dolphin CT60, User Manual, Page: 88 / 124

76 Dolphin CT60/CT60 XP Mobile Computer User Guide
5. Tap the Notify for public networks to toggle the setting on or off.
Honeywell Wi-Fi Settings
To access Wi-Fi preference settings for advanced configuration of the wireless
802.11 radio in the mobile computer:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & internet . > Wi-Fi .
3. Tap Wi-Fi preferences . The Configure Wi-Fi menu appears.
4. Tap Advanced > Honeywell Wi-Fi Settings .
5. Tap a setting to enable or disable the option or to access additional parameters
that configure the Wi-Fi radio.
Connect to an Ethernet Network
To connect the computer to an Ethernet network, you need an eHomeBase or
NetBase.
1. Make sure the base is connected to your Ethernet network.
2. Place the computer in the base.
3. Swipe up from the bottom of the Home screen to access all apps.
4. Tap Settings > Network & Internet > Ethernet . The Ethernet setting is
turned On by default.
5. Tap Ethernet .
The Ethernet connection screen shows the current Ethernet connection. By
default, the computer assumes a DHCP connection, and that your network has
assigned an IP address automatically. If DHCP is working, the Ethernet base
should indicate that communication with the network is occurring.
6. (Optional) To assign a static IP address.
a. Tap DHCP and then select Static from the list.
b. Enter the required network information, and then tap Apply .
7. Tap Save .