manualshive.com logo in svg

Honeywell Dolphin CH80, User Manual, Page: 63 / 104

Share
Download
Honeywell Dolphin CH80 User Manual Download Page 63

Dolphin CN80 Mobile Computer

53

6. Select a cellular carrier.

7. Tap 

Apply

 and then 

OK

 to verify the change.

8. Tap 

OK again 

when the “Settings are saved” message appears. Under 

Current 

Config

 the active SIM slot appears with the carrier setting you selected.

Activate the UMTS Phone

You use a SIM card to activate the UMTS phone on your CN80 WWAN model 
computer (CN80L1N). You can purchase the micro SIM card from your network 
provider. Dolphin CN80 WWAN models includes two SIM card slots (SIM 1 and 
SIM 2) for multiple network provider flexibility.

1. Select a network carrier. To learn how, see 

Add or Switch Between Network 

Carriers

 on page 52.

2. Activate and configure the SIM slot you are installing the card in, see 

Select a 

SIM Card Slot

.

3. Press and hold the 

Power

 button until the options menu appears.

4. Tap 

Power Off 

and then 

OK

 to verify.

5. Release one end of the hand strap.

6. Slide the battery latch to the right.

Summary of Contents for Dolphin CH80









































































































Reviews:

No comments