Honeywell Dolphin 75e, User Manual

Page: 95 / 124

9 - 1
9
Dolphin 70e Black eBase (Model 70e-EHB)
Overview
The Ethernet Base (eBase) enables a single Dolphin 75e computer to communicate with a host device over an Ethernet
network. The 70e-EHB charger is designed for use with the following Dolphin models and batteries, manufactured for Honeywell
International Inc:
Unpacking the eBase
Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin eBase Ethernet cradle, model 70e-EHB
• One power supply (see Power on page 9-4)
• One power cord
These items are needed to set up and operate the eBase. If any items are missing or anything appears to be damaged, contact
your Customer Account Representative. Keep the original packaging in case you need to return the eBase for service or to store
the eBase while not in use.
Optional Equipment
• A standard USB (Type A to B) cable is required when using the eBase for USB communication between the terminal and
a host device.
• A standard CAT-5 Ethernet network cable is required when using the eBase for communication between the terminal and
a host device over an Ethernet network.
Charging Overview
The base provides power to the intelligent battery charging system in all Dolphin terminals that senses when a full charge has
been achieved and switches to a trickle charge to maintain the full charge. The base completes a full charge of the main battery
pack installed in the terminal seated in the terminal well in 4 hours for the standard battery or 6 hours for the extended battery.
The base completes a full charge of the battery pack in the
Auxiliary Battery Well (see page 9-3) in 4 hours for the standard
battery or 6 hours for the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the Guidelines for Battery Pack
Use and Disposal on page 2-13.
Convenient Storage
The intelligent battery charging system makes this base a safe and convenient storage receptacle for your Dolphin terminal.
Capacity
The base holds one terminal and features an auxiliary battery well behind the terminal well that can charge a battery pack
independently of the terminal well. This means that one base can charge two battery packs: the one installed in the terminal and
a spare.
Dolphin Models Battery Model No. Battery Part No. Battery Specification
Dolphin 75e
Dolphin 70e 70e-BTSC BAT-STANDARD-02 Li-ion 3.7V, 6.179 watt hour
70e-BTEC BAT-EXTENDED-02 Li-ion 3.7V, 12.358 watt hour
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
not covered by the warranty.
!
!