Honeywell DCP 50, Product Manual

Page: 6 / 98

2.3 CONNECTIONS AND WIRING 2-2
3 PROGRAM DEFINITION MODE
- CREATING/EDITING A PROGRAM 3-1
3.1 ENTRY 3-1
3.2 CREATING A PROGRAM 3-2
3.3 DEFAULT VALUES AND ADJUSTMENT RANGES 3-9
3.4 EXIT FROM PROGRAM DEFINE MODE 3-9
4 CONTROLLER SET-UP MODE 4-1
4.1 PARAMETER DETAILS 4-3
4.2 EXIT FROM CONTROLLER SET-UP MODE 4-9
5 MODBUS COMMUNICATIONS 5-1
5.1 INTRODUCTION 5-1
5.2 MODBUS FUNCTIONS SUPPORTED 5-1
5.3 MESSAGE FORMATS 5-1
5.4 PARAMETER NUMBERS 5-7
5.5 PROFILER STATUS BYTE 5-11
5.6 PROFILER COMMANDS 5-11
6 CONFIGURATION MODE 6-1
6.1 ENTRY INTO CONFIGURATION MODE 6-1
6.2 HARDWARE DEFINITION CODE 6-1
6.3 OPTION SELECTION 6-3
6.4 CONFIGURATION MODE PARAMETERS 6-4
6.5 EXIT FROM CONFIGURATION MODE 6-9
(vi)