Global Technical Assistance Center
Page 9
Segment
Number
Segment
Type
Loop 1 Target
Setpoint
Segment
Ramp Rate
Shows Profile statement being created.
Ramp Time
(Time to reach Target Setpoint)
Ramp Rate
(Rate of change to a Target Setpoint)
Step
(Jump to a target Setpoint)
Dwell
(Keep current Setpoint)
Hold
(Hold Profile until released)
Loop
(Back to Previous Setpoint)
Join
(Connect to another Profile)
End
(terminate Profile)
Repeat Segment Then End
(Repeat a sequence of joined
Profiles)
The Sepoint Value to be reached by Loop 1 at the end of the
segment.
Loop 2 Target
Setpoint
The Sepoint Value to be reached by Loop 2 at the end of the
segment.
Rate of Change to Target Setpoint (.001 to 9999.9 Units/Hour)
Segment
Dwell Time
Time to stay at Current Setpoint (hh.mm.ss)
Number of
Loops
If the Segment type is Loop, enter the number of times to
repeat the Loop
Back to
Segment
Number
If the Segment type is Loop, enter the segment to loop back to
Segment
Ramp Time
Time to ramp to next Segment Setpoint (hh.mm.ss)
Se
gm
en
t
D
at
a