Quick Start: DC Charge
Controller for
Honeywell Wind Turbine WT6500 - Rev 2.0 - 29Nov11
Quick Start
5
Connection:
(2) ¾” Conduit
(1) 1” Conduit
Battery terminal lugs
CAT5E or CAT6 stranded cable
(1) #4 THWN - 2 red
(4) #4 THWN - 2 black
(1) #4 THWN - 2 green
(1) #6 THWN - 2 green
(3) #10 THWN - 2 black
(1) #10 THWN - 2 red
Unpack
(Refer to instructions in package)
DC Charge Controller: Serial #___________________
Quick Start: DC Charge Controller
On/Off Switch Box: Serial #___________________
Turbine crate:
Unpacking Instructions
Turbine: Serial #____________________
(2) Deflectors and mounting hardware
DCCC Junction box with dump load
Owner’s Manual: Wind Turbine
QA Inspection Sheet
Warranty Registration Card
Mount and Level Turbine
– Refer to lift point on page 12
Connect
– Refer to pages 14-15 for wiring diagrams
Commissioning
– Refer to page 16
Status LED’s Operation Legend
– Refer to page 17
Note:
•
A run of conduit shall contain not more than four quarter bends
or a combination of bends totaling 360 degrees between pull
points. Tubing shall not be threaded, and fittings shall be listed
for use with EMT and shall be securely fastened to the tubing.