CONFIDENTIAL
Website:
http://www.honeywellaircoolers.com
15
2.5 How To Change Swing Motor
Remove the back panel follow the procedure 2.1.1
Remove the right side panel follow the procedure 2.1.3
Remove the switch box follow the procedure 2.2.1
2.5.1
Swing Switch And Wiring Connector.
Use screw driver to remove 2
galvanized screws (ST3X10)
on
swing switch of the control
panel.
Remove the pink wire on the
swing switch.
Remove the wiring cap (below
picture shown).
Note: connection is between
swing motor and N wire of
power cord.
2.5.2
Swing Motor And Swing Motor Wheel.
Use screw driver to remove 2
galvanized screws(ST4X12)
on
swing motor.
Remove the swing motor.
Use screw driver to remove 1
galvanized screw(ST3*8) on the
swing motor wheel.
Remove the swing motor
wheel.
Get the swing motor.
2.5.3
Swing Motor Wiring Connection
Swing motor wiring connection refers to part 4.2 Wiring Color Description.
