background image

16

17

...an explanation for householders

A programmable room thermostat is both a programmer and a room thermostat. A 

programmer allows you to set ‘On’ and  ‘Off’ time periods to suit your own lifestyle. 

A room thermostat works by sensing the air temperature, switching on the heating 

when the air temperature falls below the thermostat setting, and switching it off once 

this set temperature has been reached. 

So,  a  programmable  room  thermostat  lets  you  choose  what  times  you  want  the 

heating to be on, and what temperature it should reach while it is on. It will allow you 

to select different temperatures in your home at different times of the day (and days 

of the week) to meet your particular needs.

 

Turning a programmable room thermostat to a higher setting will not make the room 

heat up any faster. How quickly the room heats up depends on the design of the 

heating system, for example, the size of boiler and radiators. 

Neither  does  the  setting  affect  how  quickly  the  room  cools  down.  Turning  a 

programmable  room  thermostat  to  a  lower  setting  will  result  in  the  room  being 

controlled at a lower temperature, and saves energy.

The way to set and use your programmable room thermostat is to find the lowest 

temperature settings that you are comfortable with  at the different times you have 

chosen, and then leave it alone to do its job. The best way to do this is to set low 

temperatures first, say 18°C, and then turn them up by one degree each day until 

you are comfortable with the temperatures. You won’t have to adjust the thermostat 

further. Any adjustments above these settings will waste energy and cost you more 

money.

If  your  heating  system  is  a  boiler  with  radiators,  there  will  usually  be  only  one 

programmable room thermostat to control the whole house. But you can have different 

temperatures in individual rooms by installing thermostatic radiator valves (TRVs) on 

individual radiators. If you don’t have TRVs, you should choose a temperature that 

is reasonable for the whole house. If you do have TRVs, you can choose a slightly 

higher setting to make sure that even the coldest room is comfortable, then prevent 

any overheating in other rooms by adjusting the TRVs.

WHAT IS A PROGRAMMABLE ROOM THERMOSTAT?

Summary of Contents for CM901



















Reviews: