5
d.
After a short pause the thermostat will display information on the screen and is now
ready for use.
e
. Replace the battery cover by sliding it firmly back into the front of the thermostat.
STEP 2: Setting the Date and Time
To set the Date and Time:
a.
Press the
DATE/DAY
button to begin setting the date.
When you set the date
for the first time after the batteries are inserted, the
display will show:
Press the
or
buttons to set the current day of
the month (e.g.
d 01
= 1
st
day of the month) then press
the green
button to confirm.
b.
Press the
or
buttons to set the current month of
the year (e.g.
m 01
= January) then press the green
button to confirm.
c.
Press the
or
buttons to set the current year
(e.g.
yr 13
= 2013) then press the green
button to
confirm.
The date is now stored and the Day Indicator will be
displayed under the current day of the week (e.g. 1 =
Monday, 2 = Tuesday, etc.)
d.
Use the or buttons to set the correct time then
press the green
button to confirm. Each press of
the buttons will change the time by one minute and
holding them down will change the time slowly at first
and get progressively quicker.
Note:
If this mode is entered accidentally then press the
AUTO
,
MAN
or
OFF
buttons to exit.
STEP 3: Running the Built-in Heating Program
The thermostat is now ready for operation. Press the
AUTO
button and the built-in
heating program will start running.
Note:
The built-in heating program has been
designed to provide normal comfort requirements, but if you want to customise the
settings please see the next section ‘
Programming the CM707
’.
AM
SETTING-UP THE CM707
