background image

5

Support

To search our knowledge base for a solution or log into the Tech-

nical Support portal and report a problem, go to 

www.hsmcontactsupport.com

.

User Documentation

For the user guide and other documentation, go to 

www.honeywellaidc.com

.

Limited Warranty

For warranty information, go to 

www.honeywellaidc.com

 and 

click Resources > Warranty.

Patents

For patent information, see 

www.hsmpats.com

.

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make 

changes in specifications and other information contained in 

this document without prior notice, and the reader should in all 

cases consult HII to determine whether any such changes have 

been made. The information in this publication does not repre-

sent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omis-

sions contained herein; nor for incidental or consequential 

damages resulting from the furnishing, performance, or use of 

this material. HII disclaims all responsibility for the selection 

and use of software and/or hardware to achieve intended 

results.

Summary of Contents for ChargeBase CT40-CB








Reviews: