Honeywell CentraLine EAGLEHAWK NX User Manual Download Page 11

Page: 11 / 78

EAGLEHAWK NX CONTROLLER

BASIC OPERATION PROCEDURES

EN2Z-1053GE51 R0119

LEDs (4)

6 LEDs indicate operational statuses of the controller.

The following section gives an overview over the LEDs with the relevant operational

statuses of the controller.

Power LED (green)

Power LED Behavior Meaning

1 ON

Normal operation

2 OFF

Power supply not OK

Status / Alarm LED (red)

LED Behavior

Meaning

1 LED remains OFF after power-up

Normal operation

2 LED is lit continuously after power-up The controller has encountered a

hardware problem or
The application has a fault or
The controller has been powered up

without an application or
The operator has manually stopped the

application, e.g., using XW-Online. In

this case, the LED will light up 20

minutes after power-up without
application

3 LED flashes continuously with

following pattern:
4 x ON/OFF followed by pause

Sensor failure of analog input

5 LED flashes continuously with

following pattern:
7 x ON/OFF followed by pause

Communications failure on Panel Bus

RS485-1, Send (Tx) / Receive (Rx) LED (yellow)

RS485-1 LED Behavior

Meaning

1 Both LEDs are flickering

Normal operation, RS485-1

communication is functioning properly

2 Both LEDs are OFF

No Rs485-1 communication

3 Rx Led is flashing and Tx is OFF RS485-1 communication is switched off

but controller is receiving data from other
controllers

4 Tx Led is flashing and Rx is OFF Controller is trying to establish a

RS 485-1 connection but there is no
answer

Application LEDs (yellow)

LED Behavior

Meaning

1 LED is lit continuously

Platform is starting

LED is flashing

Platform is connected

2 LED is lit continuously

Station is starting

LED is flashing

Station is running

Operating Keys (5)

The operating keys provide the following functions:

Summary of Contents for CentraLine EAGLEHAWK NX














































































Search results

Summary of Contents for CentraLine EAGLEHAWK NX

Reviews:

Honeywell CentraLine EAGLEHAWK NX, User Manual, Page: 11 / 78

Search results

Summary of Contents for CentraLine EAGLEHAWK NX

Reviews: