Honeywell CENTRAL HUB, User Manual

Page: 25 / 39

11. Activate the device. Click the "Browse" button to find the step 1) Save the local
"setup.conf" path, then click "Upload", wait for about 10s, check the status and display
"Activation", indicating that the device is successfully activated.
NOTE: File must be named setup.config but will upload as fakepathsetup.config
NOTE: For user who use ‘‘WAN’’ mode uplink HCH to Safety Suite, to activate the device follow
the process below:
l
Record the HCH300 device MAC address on status first page.
l
Disconnect HCH from computer network port connection and Connect device network
cable to Router LAN port. Router will assign new IP address for the HCH device.
l
Visit your Router management web page and read the new IP address (ex.
192.168.8.146) by the MAC address.
HCH 24 User Manual