Honeywell CENTRA LINE WEB-HMI10/CF, User Manual, Page: 11 / 18

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)
11 EN2Z-1077GE51 R0621
Date & Time
Provides access to the HMI panel date and time and to setup NTP operation if
required. Currently, HMI panel only makes use of date and time settings to provide
an accurate timestamp to entries in the log files.
Parameter Description
Current Timezone Choose the required country/timezone from the
displayed options.
Current Date Set the onboard date
Local Time Sets the onboard clock (24-hour)
Automatic Update (NTP) When enabled, use to specify the address of an NTP
server.
Accept NTP requests When enabled the date and time will be synchronised
to the remote NTP server.
Networks
This option enables network parameters to be viewed and changed. Following are
available parameters in edit mode:
Parameter Description
General Settings Device hostname
Avahi Hostname
Network Interface Network parameters of the available interfaces

Name (eth0, eth1 or eth2)

Label (WAN , LAN1 or LAN2)

MAC Address

DHCP (enabled or disabled)

Address - current IP address

Netmask - current subnet mask

Gateway - network gateway IP address

Bridged - network bridge address
For more details refer to the Configure the Network
interface on page 7.
DNS
DNS Servers
Generally provided from the DHCP servers, but can be
modified in edit mode
Search Domains
Optional domains that will be used in concatenation
with the provided urls.
Services
This screen allows the Bridge/Switch Service to be enabled and configured. Using
this service it is possible to connect together the primary WAN (eth0) network
adapter with the secondary network interfaces (eth1 and eth2).
When enabled, the secondary interfaces (eth1 and eth2) share the same IP address
as eth0, and any devices connected to eth1 and eth2 behave as though were
directly connected to eth0.

Enabled: Off (default)/ On (default).

Type: SW Bridge (br0) is the default and only option.

Network Interfaces: eth0, eth1, eth2 - select which Ethernet ports are
active.