Honeywell CAR BLACK BO, User Manual, Page: 9 / 14

Temperature Detection Function
If the product becomes too hot, the internal temperature sensor
will turn off the product.
("T57" at the bottom right corner of the screen indicates that the
product is off. "T45" indicates that the products is on again.)
(The numbers at the bottom right corner do not indicate the temperature.)
Manual Recording
Other Features
1. If the vehicle is motionless for more than the set time,
Parked Recoding mode will be activated.
2. Parked Recording mode activation time can be set in the Settings
menu. (No Setting, 5 min., 10 min., 15 min., 30 min. )
3. Recoding will begin 1~5 seconds before a motion is detected and
end 15 seconds after. If there is continuous motion, recording will
be saved at 1 minute intervals.
✽
In low light, motion can be detected through changes in the Gain level
and C-MOS Sensor rolling.
4. Video will be recorded at 5FPS.
Parked Recording
1. Pressing the Manual Recording (REC)
button will activate manual recording.
2. Video from 5 seconds prior to pressing the
button to 15 seconds after will be recorded.
(Total 20 seconds)
※
When the Black Box is off, there may be no output depending
on the battery capacity.
N
O
T
E
The power of the Black Box could be shut down by the
accident during constant recording or event recording.
In this case, the footage in about 1-3 seconds after the accident
might be recorded except the footage before the accident.
14
| No. 1 Global Security Company | | No. 1 Global Security Company |
15
Use
Memory Card Maintenance
On the 1st and 15th of every month, if the power is turned off and then
on, you will hear a reminder that says, "
It is time to check the Memory
Card.
" To prevent errors that can occur as a result of not formatting the
memory card for an extended period of time, please reformat the
memory card on a regular basis.
Firmware Update
1. Using a PC, format the memory card as FAT32.
2. Copy the firmware update file to the memory card's root directory.
3. Insert the memory card into the Black Box.
4. Turn on the Black Box.
5. Proceed with the update after the audible instructions.
6. The Black Box will restart automatically after the firmware
upgrade has completed.
*An error may occur if the power is turned off during a firmware upgrade.