background image

1

EN1C-0015SZ20 R0602

C7061 A/F

DYNAMIC SELF CHECK ULTRAVIOLET FLAME DETECTOR

APPLICATION

The C7061A is a dynamic self-checking flame detector for
sensing the ultraviolet radiation generated by the combustion
of gas, oil, or other fuels.
This flame detector is available in two versions:
model C7061A for use in Standard applications, and model
C7061F for use in installations requiring explosion-proof
packaging. The flame detector is designed for use with either,

R7061 Dynamic Self-Check Ultraviolet amplifier and
• R4348 Flame Switch or,

or with,

R7861A Dynamic Self-Check Ultraviolet amplifier and,
• 7800 SERIES Burner Programmers

These configurations provide a closed-loop, self-checking
circuit which insures the integrity of both amplifier and flame
detector. Improper response simulated flame loss results in
a safety shutdown and/or alarm.

CONTENTS

GENERAL

Description .................................................................... 2
Features ......................................................................... 2
Orderdering information ................................................ 2

TECHNICAL DATA

Specification .................................................................. 3
Standards and approvals .............................................. 4
Replacement parts and accessories ............................. 4
Dimensional drawing ..................................................... 5

INSTALLATION AND OPERATION

Planning the installation ................................................ 6
Installation ..................................................................... 8
Wiring .......................................................................... 10
Adjustement and checkout ......................................... 12

VARIOUS

Troubleshooting .......................................................... 13
Service ......................................................................... 14

model C7061F

model C7061A

PRODUCT HANDBOOK

Summary of Contents for C7061A

















Reviews: