GasAlertMicro
User Manual
Troubleshooting
The detector’s electronics are protected from variations in humidity and corrosive atmospheres. If you encounter a problem, try the
solutions listed in the table below.
If you are still unable to correct the problem, contact
.
Table 16. Troubleshooting Tips
Problem Possible
Cause Solution
The detector does not turn on.
→
No batteries
→
Depleted batteries
→
Damaged or defective detector
→
Install batteries (see
)
→
)
→
The detector enters alarm immediately
when it is turned on.
→
Sensor needs to stabilize
→
Low battery alarm
→
Sensor alarm
→
Used sensor: wait 60 seconds
New sensor: wait 5 minutes
→
)
→
Replace sensor (see
)
The activation self-test fails during one
of the checks.
→
General fault
→
62