manualshive.com logo in svg

Honeywell ADEMCO VISTA 10P, Installation Manual

Share
Download
Honeywell ADEMCO VISTA 10P Installation Manual Download Page 14

14

TOUCHSCREEN KEYPADS

The SEM is compatible with AUI devices, including the 6280, Tuxedo Touch, 
and other touchscreen keypads. Arming, disarming, panics, and alarms 
initiated on these keypads will be processed by Alarm.com and reported to 
the central station. However, the following activity will not be processed by 
Alarm.com 

unless the keypad is used in Console Mode

. 

• 

Changing the Installer Code via Quick Programming mode

• 

Bypassing open sensors

• 

The specific user that armed or disarmed the system

Please note that the SEM supports Z-Wave automation via Alarm.com 
only. This means that customers using the Tuxedo Touch to control their 
Z-Wave devices will need to choose whether to continue using the Tuxedo 
Touch for Z-Wave automation, or whether to switch to Alarm.com  
(for example, automation control using the Customer Website, Mobile 
App, and intelligent automation rules). If the customer chooses to 
switch to Alarm.com Z-Wave control, all of the Z-Wave devices will need 
to be deleted from the Tuxedo Touch and learned into to the SEM. 

Even if customers choose not to switch to Alarm.com for Z-Wave 
automation, they will still be able to enjoy access to video, garage door 
automation, and Lutron lighting control in addition to interactive security 
with Alarm.com.

Summary of Contents for ADEMCO VISTA 10P

























Reviews:

No comments

Brands by name

Popular brands

Load more brands