background image

 

 

LIMITED WARRANTY 

Honeywell International Inc., acting through its Security & Custom Electronics business ("Seller"), 2 Corporate Center Drive, Melville, NY, 
11747, warrants its product(s) to be in conformance with its own plans and specifications and to be free from defects in materials and 
workmanship under normal use and service for 24 months from the date stamp control on the product(s) or, for product(s) not having a 
manufacturer’s date stamp, for 12 months from date of original purchase unless the installation instructions or catalog sets forth a shorter 
period, in which case the shorter period shall apply. Seller's obligation shall be limited to repairing or replacing, at its option, free of charge for 
materials or labor, any product(s) which is proved not in compliance with Seller's specifications or proves defective in materials or workmanship 
under normal use and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product(s) is altered or improperly 
repaired or serviced by anyone other than Honeywell factory service. Connection of any device(s) to a communicating bus of a Honeywell security 
system (e.g., keypad bus, polling loop) other than those manufactured or approved by Honeywell shall void this warranty.  For warranty service, 
return product(s) transportation prepaid, to your local authorized Honeywell representative.  

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR 
OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO CASE SHALL SELLER BE LIABLE TO 
ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR 
IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE 
SELLER'S OWN NEGLIGENCE OR FAULT.  

Seller does not represent that the product(s) it sells may not be compromised or circumvented; that the product(s) will prevent any personal 
injury or property loss by burglary, robbery, fire or otherwise; or that the product(s) will in all cases provide adequate warning or protection. 
Customer understands that a properly installed and maintained alarm system may only reduce the risk of a burglary, robbery, fire

,

 or other 

events occurring without providing an alarm, but it is not insurance or a guarantee that such will not occur or that there will be no personal 
injury or property loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY 
DAMAGE OR OTHER LOSS BASED ON A CLAIM THAT THE PRODUCT(S) FAILED TO GIVE WARNING. HOWEVER,

 

IF

 

SELLER

 

IS

 

HELD

 

LIABLE,

 

WHETHER

 

DIRECTLY

 

OR

 

INDIRECTLY,

 

FOR

 

ANY

 

LOSS

 

OR

 

DAMAGE

 

ARISING

 

UNDER

 

THIS

 

LIMITED

 

WARRANTY

 

OR

 

OTHERWISE,

 

REGARDLESS

 

OF

 

CAUSE

 

OR

 

ORIGIN,

 

SELLER'S

 

MAXIMUM

 

LIABILITY

 

SHALL

 

NOT

 

IN

 

ANY

 

CASE

 

EXCEED

 

THE

 

PURCHASE

 

PRICE

 

OF

 

THE

 

PRODUCT(S),

 

WHICH

 

SHALL

 

BE

 

THE

 

COMPLETE

 

AND

 

EXCLUSIVE

 

REMEDY

 

AGAINST

 

SELLER. 

This warranty replaces any previous warranties and is the only warranty made by Seller on this product(s). No increase or alteration, written or 
verbal, of the obligations of this Limited Warranty is authorized. 

 

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 

This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following statement for your 
information: 

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the 
manufacture's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits 
for a Class B computing device in accordance with the specification in Part 15 of FCC Rules, which are designed to provide reasonable protection 
against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

 

If using an indoor antenna, have a quality outdoor antenna installed. 

 

Reorient the receiving antenna until interference is reduced or eliminated. 

 

Move the radio or television receiver away from the receiver/control. 

 

Move the antenna leads away from any wire runs to the receiver/control. 

 

Plug the receiver/control into a different outlet so that it and the radio or television receiver are on different branch circuits. 

 

The user shall not make any changes or modifications to the equipment unless authorized by the installation Instructions or User's Manual. 

Unauthorized changes or modifications could void the user's authority to operate the equipment. 

FCC / IC STATEMENT 

This device complies with Part 15 of the FCC Rules, and RSS 210 of IC. 

Operation is subject to the following two conditions: (1) This device may not cause harmful 
interference (2) This device must accept any interference received, including interference that may 
cause undesired operation.

 

 

2 Corporate Center Drive, Suite 100 

P.O. Box 9040, Melville, NY  11747 

Copyright

 2007 Honeywell International Inc. 

www.honeywell.com/security 

ÊN7635-1V2ÉŠ 

N7635-1V2  12/07  Rev. A

 

Summary of Contents for ADEMCO 5882AP

Page 1: ...e 1 a Remove the receiver s circuit board from its base by bending back the two flexible plastic tabs that hold the board s lower edge b In the control s cabinet unfasten and move the control circuit board downward if already installed c Hang two mounting clips provided with the receiver on the raised cabinet tabs as shown in Detail B of Figure 1 d Insert the top of the receiver board between the ...

Page 2: ...ut Aux Power GREEN Data Out to Control YELLOW Data In from Control BLACK Ground Range 60m nominal indoors from wireless transmitters the actual range to be determined with the security system in Figure 2 TO THE INSTALLER Regular maintenance and inspection at least annually by the installer and frequent testing by the user are vital to continuous satisfactory operation of any alarm system The insta...

Page 3: ...ng in bed violent explosions escaping gas improper storage of flammable materials overloaded electrical circuits children playing with matches or arson Depending on the nature of the fire and or location of the smoke detectors the detector even if it operates as anticipated may not provide sufficient warning to allow all occupants to escape in time to prevent injury or death Passive Infrared Motio...

Page 4: ...CLAIM THAT THE PRODUCT S FAILED TO GIVE WARNING HOWEVER IF SELLER IS HELD LIABLE WHETHER DIRECTLY OR INDIRECTLY FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE REGARDLESS OF CAUSE OR ORIGIN SELLER S MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT S WHICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER This warranty replaces any pre...

Reviews: